At the Perth Garage Door Company all of our fully qualified Installers have a minimum of 7 years Installation experience, so when you have the largest moving part in your house being fitted you can be rest assured that it has been fitted with the utmost experience.
Roller doors are usually installed behind the door opening, In most instances, Metal jambs may be require, if not we can fit directly to the brickwork.
There should be sufficient room or clearance on each side behind the opening to house the support brackets and track guides with good working clearance.
In most cases, approximately 400mm of head room is required to accommodate the rolled-up curtain. A Roller Door can be installed where there is less than the headroom mentioned above, under certain circumstances. In some cases, the door can be installed with the curtain extending down into the opening space, when the headroom is very low a pelmet can be installed to improve the appearance of the door and reduce any gap.
Sectional Garage Door Operation
Optimum operational results are achieved in sectional doors using standard headroom equipment. Low Headroom equipment can be used under special circumstances for sectional doors where the head room is between 250mm and 150mm. This may occur where there is insufficient headroom, when there is overhead interference such as plumbing fixtures or when maximum opening height is required within the building.
So don’t delay, Call us now and speak to a Perth Garage Door Company representative on (08) 9279 4551.